Shop headings: New Spares | Used Spares | Accessories | Brands
A2 M6 x 40mm stainless steel socket cap screw
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
M10 schnorr washer, many applications
Anti vibrate washer. Also known as AP8152220
More than 5 in stock
19149800 GU19149800 19 14 98 00
1914 9800 1914.9800 19.14.98.00
£0.70
INC VAT
£0.58 EX VAT
M6 wavy washer
Also known as Guzzi ref. 95129115
More than 5 in stock
03013800 GU03013800 03 01 38 00
0301 3800 0301.3800 03.01.38.00
£0.90
INC VAT
£0.75 EX VAT
Cartridge oil filter UFI 23 149 00
Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.
You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket).
Please note that Daytona RS and T5 Polizia use filter SIA15300
More than 5 in stock
14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00
£10.50
INC VAT
£8.75 EX VAT
Quality sump gasket, used for upper sump gasket on V11 Sport, 1100 Sport and Daytona RS. See ENA01360 for lower sump gasket for V11 Sport, 1100 Sport and Daytona RS. See ENA05630 for lower sump gasket for CARC models up to 2015.
Two required if you have a sump extension fitted. Supercedes Guzzi ref. 01003650
More than 5 in stock
14003600 GU14003600 14 00 36 00
1400 3600 1400.3600 14.00.36.00
£4.50
INC VAT
£3.75 EX VAT
Quality rocker cover gasket for square barrel 850, 1000 and 1100 models
Can also be used in place of ENA97139 on CARC models, some customers report that this gasket fixes problems with weaping rocker covers on these models
More than 5 in stock
14023760 GU14023760 14 02 37 60
1402 3760 1402.3760 14.02.37.60
£3.00
INC VAT
£2.50 EX VAT
Exhaust gasket
Header gasket may be supplied in copper or aluminium
More than 5 in stock
90718370 GU90718370 90 71 83 70
9071 8370 9071.8370 90.71.83.70
£2.75
INC VAT
£2.29 EX VAT
Outer valve spring
More than 5 in stock
13037400-z 13037400 GU13037400 13 03 74 00
1303 7400 1303.7400 13.03.74.00
£6.20
INC VAT
£5.17 EX VAT
A2 stainless socket cap screw M10 x 40, used for fork slider pinch bolts on 35mm big twin forks and 32mm small twin forks
More than 5 in stock
98620540 GU98620540 98 62 05 40
9862 0540 9862.0540 98.62.05.40
£1.50
INC VAT
£1.25 EX VAT
1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec
Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004
More than 5 in stock
£8.50
INC VAT
£7.08 EX VAT